Please login or register

README : Battery Info Bohola11

Please email the Administrator if you cannot login admin@boholairsoft.com



Join the forum, it's quick and easy

Please login or register

README : Battery Info Bohola11

Please email the Administrator if you cannot login admin@boholairsoft.com

Would you like to react to this message? Create an account in a few clicks or log in to continue.

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]

1README : Battery Info Empty README : Battery Info Sat Dec 19, 2009 7:57 pm

Mr.Lee

Mr.Lee
 
 
It has come to attention that many people are unaware about charging times for batteries. Rather than a new post for every noob, I thought I'd just clear it up.


NiCad

If you have a Nickel Cadium battery you need to use the following equation:

Battery capacity x 1.4 / Charger Output

For example:

For a 600mah small battery on a 250mah charger: 600 x 1.4 / 250 = 3.36 hours

For a 2400mah large battery on a variable charger charging at 120: 2400 x 1.4 / 120 = 28 hours


NIMH

Nickel Metal Hydride batteries are less charging efficient and use the following equation:

Battery capacity x 1.5 / Charger Output

For example:

For a 1050mah small battery on a 250mah charger: 1050 x 1.5 / 250 = 6.3 hours

For a 3300mah large battery on a variable charger charging at 120: 3300 x 1.5 / 120 = 41.25 hours




Ni-Cad or NiCad (Nickel Cadium)
A single cell is 1.2volts, so if 7 2400mah cells are made into a pack the result is 7 x 1.2 = 8.4 volts. This would be a large battery. Large batteries just mean they usually fit into full stock guns, e.g. M16 or MP5A4. Although some full stock guns can fit a 9.6 volt battery which would consist of 8 cells, or even 10.8volt batteries, which consist of 9 cells. Small batteries have the same layout as large batteries but on a smaller scale. The most you can get out a small NiCad cell is 600mah, where as the most you can get out of a large NiCad cell is 2400mah. NiCad's have a constant level of power and then very suddenly drop off and die. This means your gun has a constant rate of fire right up until the end. NiCad's have to be discharged fully after use to stop the formation of crystals, these crystals shorten the life of your battery. This is also know as when a battery develops a memory.

NiMH (Nickel metal hydride)
Nickel metal hydride cells typically have more capacity than NiCad's however this comes at a price. The most you can get out of a large NiMH cell is 3600mah, although these are very rare and 3300 is more common, the most you'll get out of a small NiMH cell is 1050. As I said more capacity does not mean a better battery, this penalty is that, unlike NiCad's, NiMH's slowly lose power until they finally die. This means after a while your guns rate of fire will slowly start to decrease until it becomes hopelessly slow. NiMH do not need to be discharged although it can still be done, for the user to know how long he needs to charge from. However, I’ve heard discharging a NiHM too much can cause damage to the battery. TM Dischargers do not totally discharge batteries for safety reasons.

Original post of Botulism at AirsoftOhio.

got this from FAS...

2README : Battery Info Empty Re: README : Battery Info Sat Dec 19, 2009 8:32 pm

sidewinder

sidewinder
ako mag-charge kay basta mu-warm na ang battery kay tang2un na nako . . . naa man gud ni-advice nako ana sa FAS. . .

3README : Battery Info Empty Re: README : Battery Info Fri Jun 25, 2010 5:37 am

saitohkiyohiru

saitohkiyohiru
Daghan ba gagamit ug NiCad ug NiMH ninyo?

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum